Ball Valves


About Ball Valves

Stainless steel 3-piece ball valves

Stainless Steel 3-piece Ball Valve Full Bore with PTFE seat design, no dead angle. Manufactured from premium grade Stainless 304 or 316L, ensuring that it remains incredibly strong as well as to prevent rust. The 3-piece ball valve is WOG rating,1000psi designed to used in water, oil, gas, food & beverage processing, pharmaceutical and daily chemical, industrial fluid applications. Connection End with tri-clover/clamp, weld or thread.

Non retention ball valve

Non retention ball valve is an all-inclusive ball seat design that solves the problem of the ball valve liquid retention valve cavity. This ball valve is suitable for biopharmaceutical engineering.
Patented stem seal design, spring-compensated design, long life, low torque, long-term high temperature 150 °C.

Design and features

  • Specifications: 1/2"-4", DN10-DN100
  • Temperature: -30 to 150 ° C
  • Pressure: 10bar
  • Material: 304/1.4301, 316L/1.4404
  • Surface: Ra≤0.5μm
  • Manual, pneumatic, electric interchange
  • Disassemble the valve dimension without disassembling the pipe
  • Low steering torque
  • Washers according to FDA 177.1550
  • Connection: clamp, welding, thread, DIN, SMS, ISO, IDF, BPE, RJT
  • The valve body can be replaced regardless of the connection method
  • Certification: PED/97/23/EC
  • 100% hydraulic tested / 100% inspected - Repair Kits available consisting of seats and bushings.

Why use a 3 piece ball valve?

For processes that put heavy demands on valves, having a 3 piece ball valve is more convenient than one or two-piece ball valves. When seats and seals need to be routinely replaced, having three pieces allows for easy disassembly, servicing and reassembly without having to do major cutting on the pipe.
Three-piece ball valves also allow for elastomers to be changed to accommodate different process conditions, temperatures, pressures and flows.

Sanitary 3-Way Ball Valve

Sanitary Three Way Non-retention Ball Valve with hygienic design meet high requirement of the United States 3-A-68-00 standard, offers small torque, full degreasing, PTFE seat can work at high temperature, no retention, no dead angle, easily maintain, with very flexible combination configuration. Body Material available in Stainless 304 or 316L, suited to use in water treatment, food & beverage processing, pharmaceutical, daily chemical, industrial fluid applications. Connection End with tri-clover/clamp, weld or thread.

Three-way Ball Valve Working Diagram

Three-way ball valves can be supplied with T-ball or L-ball version:

Design and features

  • Manufactured 304 or 316L grade stainless steel body.
  • FDA-approved seat materials: FDA 21 CFR 177.2600, Teflon PTFE, FKM(optional)
  • Sanitary surface finish, available with Ra < 0.4µm or EP (SF1 and SF4)
  • Manual handle, pneumatic actuator and electric actuator are interchangeable
  • A wide selection of different end connections
  • Suitable for low and medium viscosity fluids
  • Certificates: 3A, FDA, PED 2014/68/EU, ISO9001/2008
  • Standards: DIN, SMS, ISO / IDF, BS / RJT, and ASME / BPE
  • 100% hydraulic tested / 100% inspected

Interested in our valves?

We provide customized solutions to fit your needs.
Contact us